No Picture
Stone

Selecting the Right Long Life Fences

 Long Life Fences

There are many different types of Long Life Fences wood lumber and grades available at your local home improvement store so it is important to know the important items when purchasing the materials for your repair.

Pressure Treated Lumber

Pressure treated lumber is chemically treated to inhibit fungal growth and insect activity Long Life Fences. The three common types of pressure treatment are ACQ (alkaline copper quaternary), CA (copper azole), and the newest type is MCQ (micronized copper quaternary). There are different grades of pressure treatment and proper selection depends on the severity of the location and how the wood will be exposed to the elements.

Fence Posts

When we consider the privacy fence for most homeowners, the fence post is the most critical element. The post bears all of the stress from wind gusts and is exposed to moisture and insects underground that can cause the post to deteriorate and weaken. Wood fence posts should be pressure treated and rated for ground contact. This is commonly listed as AWPA grade UC4A; the preservative retention requirements are listed below:

ACQ retention of 0.40 lb/ft3 (PCF)

CA-B retention of 0.21 lb/ft3 (PCF)

CA-C retention of 0.15 lb/ft3 (PCF) under the Wolmanized brand

Note that the MCQ pressure treatment method has not been rated by the AWPA standard.

What about cedar posts?

The quality of wood coming out of the lumber mills has declined significantly over the past 20 years – it used to be that you could get old growth heart wood (from the center of the tree) that would last for decades as a post, but today the quality is simply to variable to recommend using cedar or other naturally rot-resistant wood. Most of the trees brought into the mill are from 10-year re-growth and the posts will contain very wide rings from the sapwood layer that simply will not last.

To ensure your fence will stand for 10 years or more without worry the best method is to use pressure treated 4″ x 4″ pine posts that have the proper AWPA grade of UC4A. For severe locations that hold moisture, such a low-lying areas or where there is heavy clay soil with you may choose to go with UC4B grade posts for extra rot resistance as a higher cost.

When you are shopping for your fence posts you will probably find green pressure treated 8′ landscape timbers nearby and think to yourself “those timbers are a lot cheaper than these 4″ x 4″ pressure treated pine posts, I’ll just save some money and use the landscape timbers” – RESIST that thought. The landscape timbers may last for 1-3 years but will certainly be weaker and fail sooner than the proper pressure treated pine post.

Fence Rails

Fence rails should also be pressure treated for the longevity of the Long Life Fences, but the rails are not exposed to the same severe environment underground as the fence posts so AWPA grade UC3B is appropriate for unpainted fence rails. If you plan to paint your fence rails or apply an opaque stain then AWPA grade UC3A may also be used.

Fence Pickets

The choice of fence pickets is more of a personal preference based on the appearance that you want and if you plan to finish the Strong Fence with a paint or stain. Cedar pickets are the most common choice for their combination of pleasing appearance and natural insect resistance all for a reasonable price. White cedar is a better choice if you will apply a translucent or semi-opaque stain as the color will be more predictable than red cedar – although many of the common stain manufactures have color samples for each of their stains on the common wood types. Spruce or ‘pine’ pickets offer a more rustic appearance and are more commonly installed in 6inch widths.

Fasteners – Nails and Screws

Note the presence of copper in each of the pressure treatment methods – copper is necessary to provide the protection against decay and insects but it also has some negative effects. Copper will corrode standard fasteners much faster than regular wood – fasteners should be hot-dipped galvanized or stainless steel materials.

Key Points

Pressure treated posts should be rated for ground contact; AWPA grade UC4A. 4″ x 4″ x 8′ posts are suitable for most homeowner situations.

Nails, screws and other fasteners used with pressure treated wood should be double hot dipped galvanized or stainless steel; ASTM A 153 Class D
Reference: American Wood Protection Association…

No Picture
Split

How To Put Up A Wire Fence

How To Put Up A Wire Fence

The welded How To Put Up A Wire Fence is made from low carbon steel wire and is usually rust-proof. This type of fence is available in a lot of sizes and shapes. This is commonly found in different setups and are ultra flexible in terms of utility purposes.

Electro galvanized welded wire mesh with an orifice shaped like a box is built to make How To Put Up A Wire Fence for infrastructures that you commonly see while walking around your neighborhood or in town. The reason it is used so widely is that the mesh of the welded wire fence resists corrosion and is popularly used in construction of building.

You can easily find this kind of fence can be availed in rolls.

Dipped galvanized mesh in a very hot temperature is usually made from wires of steel. The hot zinc is used in the covering process. This kind of mesh wire is very good in designating space by creating How To Put Up A Wire Fence separations, keeping animals contained in one area, protecting valuable machinery and creating storage boxes with the wire.

Welded mesh with a coat of PVC is covered with plastic over an iron that is galvanized. The kind of materials used in making this is superb in quality. The process of coating is by covering the iron with PVS powder by a machine and then the plastic that coats the wire will be placed with a very durable adhesive agent.

This will increase the strength of the wire. This kind of material is used in homes and private properties. You can choose a lot of colors to match the area you are placing it on.

Welded Wire Fencing

The next kind of mesh is the welded stainless steel. This kind of fencing system is commonly used in big industries. This mesh is stainless and of high quality with a long lasting strength and durability. Types Of Fence is usually used in transporting some heavy tasks like mining.

A type of fencing commonly referred to as “welded wire fencing” is actually a fence panel for basic fencing. It can be galvanized or not. The non-galvanized wires are cheaper compared with the other type. It is very important that you know which type you need before buying.
Welded steel bar gratings are actually very strong and can be installed easily for a low price. This kind of fencing is used in covering walls for safety.…

No Picture
Wood

How To Prevent Wood Fence From Turning Gray

How To Prevent Wood Fence From Turning Gray

How To Prevent Wood Fence From Turning Gray is most important. Depending on the type of fence you need, will determine what wood fence panels will be required. There are hundreds of options when it comes to fencing. Just knowing that you want a wooden fence will narrow down your choices greatly.

Choosing the Right Wood Fence Panels

If your fence is for agricultural use, you are probably less concerned with its aesthetic. This will be a fence for function. Most often these fences come in a 2-rail, 3-rail, or stacked fencing variety. There are many different How To Prevent Wood Fence From Turning Gray that can be used for agricultural fencing.

For residential fencing there are many more options. There are lots of decorative and stylistic features that you would not necessarily find with agricultural fencing. Sizing is one of the main differences. If the residential fencing is for decorative purposes and not for functional needs, there is almost an unending variety of choices in wood fence panels.

Privacy fencing can be used in either residential or agricultural needs. Plain and dog eared picket Styles Of Wood Fences posts and panels are the most popular in wooden fencing for privacy. They also add a bit of security. Even with privacy fencing it is possible to have style. You might want to keep a view hidden, but you can still enjoy the interior space that you have created. There are many ways to do this with fencing.

When you have the How To Prevent Wood Fence From Turning Gray panels that you need, the next step is to get all the tools for putting the fence together. You will need to have a level to make sure the posts are in evenly. A post hole digger or auger to create the holes for the fence posts. A tamp bar to help push down the dirt around the posts. And lastly a sledge hammer and a hammer, for the actual labor of pounding in the fence posts and hammering on the wood fence panels. Each of these tools will be very valuable in getting your fence installed correctly.…