Installing Picket Fence
This article talk about Installing Picket Fence. Getting a vinyl picket fence is a great alternative to wood fencing. They can be trickier to deal with than a standard fence, but with some basic tips you can install your fencing like a pro. Many people go with vinyl fencing because, it is easy to maintain and will never need painting.
There are many style options in vinyl fencing as well.
For proper Installing Picket Fence, the first step is to determine where the fence is going to go and mark out the fence line. Starting at the first corner, drive a stake into the ground and use a string to lay out the line of where the fence will go. Anchor the string to a second stake, where the other corner will be.
Once you have your White Picket Fence Panels line determined, you will need to start making the post holes. There are two ways to do this. Using a post hold digger works really well, but is hard manual labor, especially if you have compact ground, or clay. You can also use a power auger to dig your post holes, which makes the work a little easier. Make sure that your hole is deep enough so that you can add some gravel for drainage at the bottom.
Tips For Building a Vinyl Picket Fence
You will then need to fill the hole with concrete, to just below ground level. If your posts are hollow, you can put them into the concrete after pouring it; if they are not hollow, you will need to pour the concrete after. Make sure to use a level and measure to get your post in evenly and at the correct height. Continue along the line of Installing Picket Fence for each spot you have designated will need a post. Once all the posts are in place and the concrete is dry you can start putting in the rest of the fencing. This is easily done with measuring and screwing.…