Fence Installation | QUANTUMRAREEARTH

Split Rail Fence Installation

December 8, 2013 Miracle Comments Off

Split Rail Fence Installation

Split Rail Fence Installation is among the oldest fencing methods that was used by people to fence their homesteads. Anyone living close to forests should find it important learning, the procedure for split rail fence installation. This is because, the enclosure is usually found in forested area due to the fact that it makes most of the readily available materials in the wooded area.

Although the method is archaic, it is beautiful and conspicuous especially to those who have not lost touch to tradition. It is simple, economical and generally strong. The installation is also unpretentious because it uses basic tools such as, an axe, wedge, helmet and a pair of gloves. Most importantly, the method is essential in recycling inoperative timbers and producing a useful, as well as attractive enclosure.

Procedures Used To Successfully Build A Split Rail Fence Installation

Establish where the Split Rail Fence Installation is to be installed. Make sure the place is safe and sound for one to excavate. Ensure gas, water and power line are not right underneath the area you are supposed to dig up holes. The lines can be extremely dangerous and harmful to the workforce and anyone around.

First, measure the perimeter of the area you want to enclose. The boundary line should be marked clearly to avoid confusion. To do this, mark all the corners using ground stakes and make a discernible outline by tying a guideline from one corner to another. In essence, this guarantees you a straight and well-stretched line.

With the guideline still in position, set your corner posts. Dig up a hole to plant the split posts depth. The depth of the burrow depends on the size of the post and the height of the enclosure. To be precise, it should accommodate a third of the total length of the post. Under normal circumstances, put the concrete to an appropriately of 24 inches deep and leave it to cure for a minimum of seventy-two hours. Set up your posts at approximate distance of 10 to 12 feet from each other. Now remove the guideline and make sure the posts are in straight line to each other.

Set up a guide wire and ensure the posts are vertically upright. The wire should run from one corner to the other at around 6 inches from the ground. The purpose of setting up the wire is to ascertain accuracy of the line both in dimension and smoothness.

Measure the length from post to post and cut your rail matching the length and size as of all rails as close as possible to maintain a spruce appearance. With the help of your axe and your wedge, split the post from top to bottom. You can make this Split Rail Fence Gate tips.
Make sure the split is wider at the at the top than at the bottom.

Lastly, take your hummer and drive nails through each split post and rail to join them. Caution must be taken to avoid splitting the post imperfectly to an extent that it cannot hold the rails strongly. If the procedure is carefully followed, the rails should fit tightly into the created wedge and form a perfect Split Rail Fence Installation. The fence is always strong enough to protect anything within from destruction as well as keeping the place knit and beautiful.

Split Rail Fence With Wire Mesh

July 12, 2013 Miracle Comments Off

Split Rail Fence With Wire Mesh

How many times have you closely examined Split Rail Fence With Wire Mesh? Unless you have a fence fetish, the answer is probably a big fat zero. Although this fencing type may seem modest, boring and completely unworthy of your attention, it becomes much more interesting when one considers its key role in American history.

The following is a summary of the importance of the Split Rail Fence With Wire Mesh to American pioneers, who streamed by the thousands into the American west during the late 1800s. As they settled, those pioneers used local resources as fence materials. This fence style also destroyed an even earlier way of life, that of the American cowboy. In addition, Abraham Lincoln won his presidency partially based on his reputation as a masterful rail-splitter.

How American Pioneers Built Their Fences

Because it was comparatively easy to gather logs hewn from trees that had been cleared from the land, Split Rail Fence With Wire Mesh was the most common type of pioneer fence installation. Western geography looked very different in the 1850s; there seemed to be an unlimited amount of forest for eager pioneers to clear into farmland. In the new farms springing up around young pioneer cities, pioneers split logs lengthwise to create wood for fences.

For several reasons, split rail fencing was the pioneer’s preferred type of fence installation. Much of the American West has rocky, hard ground in places. Split rail fences can be built even on hard ground. Furthermore, split rail fencing can be erected with only a few tools. These fences are simple in their construction; they don’t even require nails, which were hard to come by in the pioneer days. Due to this fencing’s simple design and minimal requirements for fence materials, pioneers across the West preferred this type of fence.

How Fencing Conquered the Cowboy

As American pioneers erected split rail fencing, they were carving up the landscape of the American west. What was previously a wide-open landscape of grazing land became a civilized patchwork of homesteads. For the reasons listed above, this fencing was usually the first sign of a new claim. Each new fenced homestead removed one more area where cowboys could graze their herds.

American artists such as Frederic Remington and Charles M. Russell highlighted the role of the split rail fence in their paintings. These two artists chronicled the Wild West in their paintings. One Remington work, The Fall of the Cowboy, shows two cowboys opening a split rail fence – almost as if they were walking out of their old way of life, and into a new American landscape of farmland and cities. As this fencing type cut across the American territories, it made it much more difficult to move livestock great distances.

Abe Lincoln: Master Politician who Started Building Split Rail Fencing
American political history also contains important references to the split rail fence. In the 1840 presidential race, William Henry Harrison mounted the “Log Cabin Campaign” to show American voters that he was truly a common man, especially compared to his opponent,

Marten Van Buren.

Lincoln used a similar tactic in his 1860 campaign for office. At a key moment of the Illinois state convention, Lincoln’s cousin John Hanks strode into the hall carrying two pieces of split fence rail that he had gathered from the Lincoln family farm. Unlike many modern political stunts, this one was real – Honest Abe really had split those rails back on the family property. Between the rails hung a banner, which proudly read, “Abe Lincoln the Rail Splitter.” The entire hall burst into wild applause as Hanks entered. Lincoln’s reputation as a common man rode on the fact that he had in fact built his own fencing back on the family farm.

Throughout American history, split rail fencing has been an important form of fence installation. Pioneers, landowners and farmers used this fencing type to cut up the land for farming, ending the cowboy way of life. Residents can honor the part split rail fencing has played in American history by having this type of Split Rail Fence Installation installed on their property.