No Picture
Wood

Vinyl Board Fencing

Vinyl Board Fencing

A board-on-board Vinyl Board Fencing is pretty much the only way to get true privacy from a wood fence. People that are considering getting a wood privacy fence often have the misconception that it will provide them with complete privacy, but that’s not the case. If you get close to a typical privacy fence, you will see that there’s space between the pickets allowing you to see between them, and there’s not a whole lot you can do about it.

The main reason for the space between the pickets is the fact that wood shrinks as it dries out and treated lumber is rarely ever completely dried out when you purchase it. Therefore, even if your fence is 100% private when it is first built, it will probably end up with spaces between each picket. In addition to shrinkage, you also have to take in to consideration that most privacy pickets don’t cost a whole lot, because they’re not a high-grade of Vinyl Board Fencing. This means that they’re often rough and usually are not completely straight. This makes it very difficult to get the pickets to fit close enough together at the top and bottom so that you can’t see between them at all.

The best way to remedy these problems is to install a board-on-board fence. It doesn’t matter if the boards aren’t perfectly straight or shrink, you will get complete privacy. This is because this type of fence doesn’t get its privacy by butting the pickets together. It’s achieved by covering the space between each picket with another picket.

It starts out being built just like a typical privacy Vinyl Board Fencing. The posts are installed in the same manner. Then, the runners (horizontal 2×4’s that the pickets get attached to) are installed like usual. The differences start when the pickets begin to get installed. Instead of placing each picket right next to the previous one, they are spaced around two inches apart on average. At this point, it looks like a regular picket fence that you can obviously see through with ease. What gives it total privacy is the next step. This is when another layer of pickets are added with the center of them placed directly over the gaps between the pickets from the first layer.

Style of board-on-board Fence

There’s also another style of board-on-board fence that most people aren’t familiar with. This one resembles siding on a house. Instead of 2 layers of pickets, there’s only one layer with this version. It’s made by having each picket slightly overlap the previous picket by an inch or two. When it’s done, there won’t be any spaces that people can peek through. It also doesn’t require quite as much wood as the other style.

You will want to keep in mind that these types of fences will cost you a little more than the average privacy Vinyl Privacy Fence. This is because they require more material and take longer to build. Although, they are significantly less expensive than most other types of fences that give complete privacy such as vinyl, brick, stone, etc. If you want complete privacy from your fence, board-on-board is going to be the most economical and efficient way to achieve while improving the look of your property. There are some other alternatives such as using tin that would cost less but won’t look near as nice.…

No Picture
Wood

Styles Of Wood Fences

Styles Of Wood Fences

To make your home more secure with Styles Of Wood Fences, increase your property value, and improve your family’s privacy. It is few things are more effective than a high quality fence. When considering building a fence on your property, there are a variety of aesthetic, material, and functional options to choose from. Some fencing materials are more visually appealing, while others offer maximum security with minimal effort to maintain performance and appearance. Here are five types of residential fence styles, to help you make the best choice for your property.

Wood Fence

Few can argue with the natural beauty and timeless quality wood grain offers. With the right sealant or stain, homeowners can create a gorgeous Types Of Fence that not only protects their yards from wandering eyes and neighborhood pests, it can also serve as a beautiful backdrop for all of your back yard landscaping efforts.

Compared to other materials, wood is by far the most visually appealing, yet also requires the most care. In general, a wooden fence will need to be carefully cleaned and re-sealed or re-stained every two to three years. Wood is also relatively inexpensive compared to most materials, allowing homeowner’s on even the strictest budget to build a beautiful fence and keep their home safe.

Iron Fence

Iron is one of the strongest, most durable materials on earth Styles Of Wood Fences. When used as a fencing material it provides a stalwart defense against threats to your home or property’s security. Wrought iron is also an incredibly beautiful material, and can be sculpted to produce unique ornamental elements to portray a certain air of elegance and timeliness to your landscape design. Iron has long been in use to create beautiful fencing to protect mansions and neighborhood homes alike. While iron is easily the most durable and everlasting of fencing materials, homeowners will pay a premium for the security it provides. However, while it is the more costly choice, it is also the most likely to add incredible value to your home’s property value.

Ameristar Ornamental Fence

Ameristar fencing is a particular type of material known for its enhanced aesthetic appearance as compared to other modern fence products. Styles Of Wood Fences manufacturer is known for modular products that are easy to install while maintaining incredible strength and durability. With fencing material made of steel or aluminum, an Ameristar fence offers maximum curb appeal and convenience of installation.

Chain Link Fence

Chain link is one of the most versatile types of fencing, and are optimally used when preventing small animals or unwanted persons from gaining access to your property while maintaining perfect visibility. Chain link is a low-cost material requiring very little maintenance. It is a fencing favorite among pet owners, and due to its flexible nature, it can be easily installed to enclose a variety of indoor and outdoor spaces.

Custom Gate Options

For any and all of the fence types, you have a variety of custom gate options that you can mix and match to achieve the ideal visual impact and maximum convenience for accessing the property. Custom gates help make your property far more secure by funneling visitors, whether authorized or not, to designated areas where they can be properly greeted.…

No Picture
Wood

Wood Fence Problems

Wood Fence Problems

Wood Fence Problems is right around the corner, and with it comes the year’s nastiest weather. Wind, rain, hail, snow — all are possible, if not likely. Most people are concerned about the ways bad winter weather can affect their homes, but what about the ways it can affect your fence?

An ugly winter storm can wreak havoc on a Wood Fence Problems, and a lot of homeowners simply don’t know what to do when that happens. Luckily, there are a few easy-to-remember tips you can follow to salvage a wood fence that has been damaged by a winter storm. But remember — if any of these steps seems too complicated or difficult, call a professional.

1. Assess the damage

The first step in repairing storm-ravaged wood fencing is to assess the damage. This doesn’t mean only damage to the Wood Fence Problems, but also damage to the landscape around it. Once you’ve made sure the area surrounding the fence is safe, approach the fence and determine what parts need to be repaired or replaced. If the storm was especially bad, make sure you check for downed power lines or tree limbs.

2. Remove large tree limbs or debris

One of the biggest threats to a wood fence during a storm is fallen tree limbs and debris. If necessary, remove limbs and branches with an axe or saw, making sure not to cause further damage to the fence. Also, clean off any yard debris that may be stuck to the fence, including leaves, mud, grass and weeds. These can contribute to wood rot over time.

3. Get supplies

Once you’ve assessed the damage and removed major obstacles, it’s time to get the supplies necessary to repair the fence. Wood fences are made of fairly common materials, so you should be able to purchase everything you need at a home improvement or hardware store. Talk to a store representative if you have any questions about the materials or tools you might need.

4. Reinforce fence posts.

Much of the damage a storm can do to a wood fence is not immediately apparent. Wind, rain and heavy snow can loosen the fence posts, weakening the structural integrity of the fence and causing leaning or collapse in the future. Check to make sure all fence posts are still sturdy, and if not, reinforce or replace them. Reinforcing wood fence posts can be done in a variety of ways, including installing wood braces on the posts and resetting them in fresh concrete.

5. Call a professional

It’s a fact — not everyone can pour concrete or set a new fence post. If you aren’t 100 percent certain you can repair or replace the storm-damaged fence yourself, you should call a professional. It may seem like a more costly solution, but if you take the DIY route and mess up, you will probably need to call a professional to replace the fence anyway. Many wood fencing professionals will do a free evaluation, so there’s no risk in calling. Better safe than sorry.

6. Play it safe

If you do choose to repair the damaged Styles Of Wood Fences yourself, remember to keep a few safety tips in mind. First, always check for downed power lines. Most municipalities are good at taking care of downed lines in a timely fashion, but there may be one near your fence that hasn’t been reported yet. Second, always wear appropriate safety gear. This includes heavy gloves, boots, pants, knee pads and safety glasses. Third, don’t take on too much. Trying to move a branch or a fence post by yourself can cause damage to the fence as well as to your body. If you don’t want to call a professional, at least ask a friend to help.

Winter storms can really damage a wood fence, but by following the above tips, you can repair or replace the damaged parts and prevent worse headaches down the road.…

No Picture
Wood

What Is Woven Wire Fence

What Is Woven Wire Fence

The What Is Woven Wire Fence is made from low carbon steel wire and is usually rust-proof. This type of fence is available in a lot of sizes and shapes. This is commonly found in different setups and are ultra flexible in terms of utility purposes.

Electro galvanized What Is Woven Wire Fence mesh with an orifice shaped like a box is built to make the fences for infrastructures that you commonly see while walking around your neighborhood or in town. The reason it is used so widely is that the mesh of the welded wire fence resists corrosion and is popularly used in construction of building. You can easily find this kind of fence can be availed in rolls.

Dipped galvanized mesh in a very hot temperature is usually made from What Is Woven Wire Fence of steel. The hot zinc is used in the covering process. This kind of mesh wire is very good in designating space by creating fence separations, keeping animals contained in one area, protecting valuable machinery and creating storage boxes with the wire.

Welded Wire Fencing

Welded mesh with a coat of PVC is covered with plastic over an iron that is galvanized. The kind of materials used in making this is superb in quality. The process of coating is by covering the iron with PVS powder by a machine and then the plastic that coats the wire will be placed with a very durable adhesive agent.

This will increase the strength of the wire. This kind of material is used in homes and private properties. You can choose a lot of colors to match the area you are placing it on.

The next kind of mesh is the welded stainless steel. This kind of fencing system is commonly used in big industries. This mesh is stainless and of high quality with a long lasting strength and durability. This kind of fencing is usually used in transporting some heavy tasks like mining.

A type of fencing commonly referred to as “welded wire fencing” is actually a fence panel for Strong Fence. It can be galvanized or not. The non-galvanized wires are cheaper compared with the other type. It is very important that you know which type you need before buying.
Welded steel bar gratings are actually very strong and can be installed easily for a low price. This kind of fencing is used in covering walls for safety.…

No Picture
Wood

How To Prevent Wood Fence From Turning Gray

How To Prevent Wood Fence From Turning Gray

How To Prevent Wood Fence From Turning Gray is most important. Depending on the type of fence you need, will determine what wood fence panels will be required. There are hundreds of options when it comes to fencing. Just knowing that you want a wooden fence will narrow down your choices greatly.

Choosing the Right Wood Fence Panels

If your fence is for agricultural use, you are probably less concerned with its aesthetic. This will be a fence for function. Most often these fences come in a 2-rail, 3-rail, or stacked fencing variety. There are many different How To Prevent Wood Fence From Turning Gray that can be used for agricultural fencing.

For residential fencing there are many more options. There are lots of decorative and stylistic features that you would not necessarily find with agricultural fencing. Sizing is one of the main differences. If the residential fencing is for decorative purposes and not for functional needs, there is almost an unending variety of choices in wood fence panels.

Privacy fencing can be used in either residential or agricultural needs. Plain and dog eared picket Styles Of Wood Fences posts and panels are the most popular in wooden fencing for privacy. They also add a bit of security. Even with privacy fencing it is possible to have style. You might want to keep a view hidden, but you can still enjoy the interior space that you have created. There are many ways to do this with fencing.

When you have the How To Prevent Wood Fence From Turning Gray panels that you need, the next step is to get all the tools for putting the fence together. You will need to have a level to make sure the posts are in evenly. A post hole digger or auger to create the holes for the fence posts. A tamp bar to help push down the dirt around the posts. And lastly a sledge hammer and a hammer, for the actual labor of pounding in the fence posts and hammering on the wood fence panels. Each of these tools will be very valuable in getting your fence installed correctly.…